Manual Batch Control Water flow Meter

Manual Batch Control Water flow Meter Application: Measuring the volume of the cold portable water passing through

Manual Batch Control Water  flow Meter 

Application:

Measuring the volume of the cold portable  water passing through the   pipeline.

Working conditions Water temperature:≤90°C Water preesure: ≤1.6Mpa

Features

Wide choice of dials.Offer a low cost solution for accurately  controlling batched quantities  of water with a choice of dial readings from 100litres to 5000 litres.

With single pointer. DN25~DN40:brass body DN50: Cast iron

A plastic lid to protect the register from knocks.

An adjustable maker indicates the desired   quantity.

Reset the big pointer to zero by hand. 

Low preesure loss.

Specifically for simple filling operations and mobile   concrete-mixers.

Use

1 Adjust the adjustable marker to reqired batch size

2.Open flow control valve until the revolving pointer coincides with the adjustable maker position

3.Reset revolving pointer to zero with zero setting lever.

Note:Please slowly close the flow control valve not abruptly,so as  to avoid preesure surges.

Installtion Requirements

The meter should be installed in horizontal position with the regiter face upwards.

Pipeline must be flushed before installation.The meter should be constantly full of water   during   operation.

Manual Batch Control Water flow Meter